after flash need pasword

Brand : Nokia
Operation : Flash Firmware (nb0)
Checking for existing devices…Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone…OK
Waiting for response…OK
Init Handshake Sequence…OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966 024663C39A5B06
Initializing Protocol…OK
Using Auto Loader Selection [1]
Preparing Loader…Done
Sending Loader…Done
Executing Loader…OK
Detecting Chip Type…OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFireDrivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [D1C-0-3320-NON-HLOS.bin] -> [modem]…Done
Writing [D1C-0-3320-sbl1.mbn] -> [sbl1]…Done
Writing [D1C-0-3320-sbl1.mbn] -> [sbl1bak]…Done
Writing [D1C-0-3320-rpm.mbn] -> [rpm]…Done
Writing [D1C-0-3320-rpm.mbn] -> [rpmbak]…Done
Writing [D1C-0-3320-tz.mbn] -> [tz]…Done
Writing [D1C-0-3320-tz.mbn] -> [tzbak]…Done
Writing [D1C-0-3320-devcfg.mbn] -> [devcfg]…Done
Writing [D1C-0-3320-devcfg.mbn] -> [devcfgbak]…Done
Writing [D1C-0-3320-adspso.bin] -> [dsp]…Done
Writing [D1C-0-3320-sec.dat] -> [sec]…Done
Writing [PLE-00WW-012-splash.img] -> [splash]…Done
Writing [D1C-0-3320-emmc_appsboot.mbn] -> [aboot]…Done
Writing [D1C-0-3320-emmc_appsboot.mbn] -> [abootbak]…Done
Writing [PLE-0-3320-00WW-boot.img] -> [boot]…Done
Writing [PLE-0-3320-00WW-recovery.img] -> [recovery]…Done
Writing [D1C-0-3320-ftm.img] -> [ftmboot]…Done
Writing [D1C-0-3320-NV-default.mbn] -> [default_nv]…Done
Writing [D1C-0-3320-hwcfg.img] -> [hwcfg]…Done
Writing [PLE-00WW-001-sutinfo.img] -> [sutinfo]…Done
Writing [fver] -> [systeminfo]…Done
Writing [PLE-0-1010-0001-userdata-ftm.img.ext4] -> [ftmlog]…Done
Writing [PLE-00WW-012-multi-splash.img] -> [multi_splash]…Done
Writing [PLE-0-0010-0001-hidden.img.ext4] -> [hidden]…Done
Writing [PLE-00WW-012-cda.img] -> [cda]…Done
Writing [D1C-0-3320-00WW-persist.img] -> [persist]…Done
Writing [D1C-0-3320-00WW-mdtp.img] -> [mdtp]…Done
Writing [D1C-0-3320-cmnlib.mbn] -> [cmnlib]…Done
Writing [D1C-0-3320-cmnlib.mbn] -> [cmnlibbak]…Done
Writing [D1C-0-3320-cmnlib64.mbn] -> [cmnlib64]…Done
Writing [D1C-0-3320-cmnlib64.mbn] -> [cmnlib64bak]…Done
Writing [D1C-0-3320-keymaster.mbn] -> [keymaster]…Done
Writing [D1C-0-3320-keymaster.mbn] -> [keymasterbak]…Done
Writing [PLE-0-3320-00WW-system.img] -> [system]…Done
Writing [PLE-0-3140-gpt_main0.bin] -> [PrimaryGPT]…Done
Writing [PLE-0-3140-gpt_backup0.bin] -> [BackupGPT]…Done
Applying Patches…………….Done
Formatting userdata…Done
Resetting FRP…Done
Setting Bootable Stroage Drive to 0…Done
Operation Finished.
QcFire Ver. 6.4
Scroll to Top