charged 2 times same phone, first try show error

Selected USB connection type
Work ID: 000000000025296D
Checking data…OK
Platform: LG MTK
Selected port: COM83
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM82
Mode: Emergency
Initializing flash…OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10i-310-160-JUL-02-2020-ARB00+0
LAF Version: 1.1
Product ID: VH03S200526002648
IMEI: 354525-11-061568-7
Target operator: LAO
Hardware: rev_11
Battery level: 26%
Reading partitions…OK
LAF Error: 80000119.
Checking security…OK
——————————————————————————–
IMEI: 354525-11-061568-7
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
——————————————————————————–
Write security backup function doesn’t work for this device with latest firmware versions. If you’ll encounter any
problem during Unlock operation – you won’t be able to restore the phone to it’s initial state, so proceed at your
own risk.

Continue?
Creating EEPROM backup…OK
Initializing flash…OK
Reading security area…
Backup saved to "Q730MM_354525110615687_20-11-2020_20-30-27.EEP"
Connecting to server…OK
Octopus smart card is present.
Checking smart card…OK
Username: j7t9aig
Authorizing…OK
Checking balance…OK
Checking operation…OK
Sending device information…OK
Get credits, needed for current operation…OK
Your balance: 300 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking…OK
Reading partitions…OK
Prepairing for change protect status…
Initializing flash…OK
Removing write protection…OK
Initializing flash…OK
Reading partitions…OK
Erasing part 1…OK
Initializing flash…OK
Erasing part 2…OK
Initializing flash…Failed!
Reconnecting phone…
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" buttons.
3. Hold "Vol+" until phone enter in Download mode, then press "OK" button.
Note: If "Ok" button isn’t active, then You should reconnect device!
Initializing flash…OK
Reading partitions…OK
Prepairing for change protect status…
Initializing flash…Failed!
Reconnecting phone…
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" buttons.
3. Hold "Vol+" until phone enter in Download mode, then press "OK" button.
Note: If "Ok" button isn’t active, then You should reconnect device!
Initializing flash…Failed!
Reconnecting phone…
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" buttons.
3. Hold "Vol+" until phone enter in Download mode, then press "OK" button.
Note: If "Ok" button isn’t active, then You should reconnect device!
Initializing flash…Failed!
Reconnecting phone…
Please, perform the following steps:
1. Press and hold "Vol-", "Vol+" and "Power" buttons.
2. When the image disappears, release "Vol-" and "Power" buttons.
3. Hold "Vol+" until phone enter in Download mode, then press "OK" button.
Note: If "Ok" button isn’t active, then You should reconnect device!
Initializing flash…Failed!
Warning: If your device were stuck at logo, after operation was completed, then please, don’t reflash your device,
first contact with Support via Skype or create thread at forum!
Performed by 3.0.7 Software version.
——————————————————————————–
Selected USB connection type
Work ID: 0000000000252A69
Checking data…OK
Platform: LG MTK
Selected port: COM83
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM79
Mode: Emergency
Initializing flash…OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10i-310-160-JUL-02-2020-ARB00+0
LAF Version: 1.1
Product ID: VH03S200526002648
IMEI: 354525-11-061568-7
Target operator: LAO
Hardware: rev_11
Battery level: 26%
Reading partitions…OK
LAF Error: 80000119.
Checking security…OK
——————————————————————————–
IMEI: 354525-11-061568-7
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
——————————————————————————–
Write security backup function doesn’t work for this device with latest firmware versions. If you’ll encounter any
problem during Unlock operation – you won’t be able to restore the phone to it’s initial state, so proceed at your
own risk.

Continue?
Creating EEPROM backup…OK
Initializing flash…OK
Reading security area…
Backup saved to "Q730MM_354525110615687_20-11-2020_20-43-47.EEP"
Connecting to server…OK
Octopus smart card is present.
Checking smart card…OK
Username: j7t9aig
Authorizing…OK
Checking balance…OK
Checking operation…OK
Sending device information…OK
Get credits, needed for current operation…OK
Your balance: 200 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking…OK
Reading partitions…OK
Erasing part 1…OK
Initializing flash…OK
Erasing part 2…OK
Initializing flash…OK
Reading partitions…OK
Prepairing for change protect status…
Restore write protection…OK
Initializing flash…OK
Reading partitions…OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don’t reflash your device,
first contact with Support via Skype or create thread at forum!
Performed by 3.0.7 Software version.
——————————————————————————–
Connecting to server …OK
Username: j7t9aig
Authorizing…OK
Checking balance…OK
Your balance: 100 credits.

PLEASE REFUND 100 CRD

Scroll to Top