BootMode : SVC
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices – 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
Enter SVC …
Waiting Device …
Check SVC …
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6501-F6311-9.0-OP-V041-20201229
MemoryInfo : EMMC : 32 GB ; DRAM : 3 GB
Platform Version: MOCORTM_18B_ITEL_W19.28.5_P12_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_ITEL_W19.28.5_P12
HW Version: sc9863A_modem
CMP_Time : 08-26-2020 12:05:12
MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P12_Debug_FM_BASE_18B_IT EL_W19.28.5_P12_sc9863A_modem_sharkl3_pub
PSN1 : 0563714059100200
Done!
Elapsed: 00:00:46
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot …
Boot sent!
Kick FDL …
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
>>> ERROR : Protocol HandShake failed!
>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot …
Boot sent!
Kick FDL …
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_3GB_RS
Sending Init Boot …
>>> ERROR : FDL Start Failed!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot …
Boot sent!
Kick FDL …
>>> ERROR : FDL NOT started!
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!