jazz digit 4g after flash become dead help

i flashed it by downloaded file from google before.
after flashed it become dead 🙁

now i downloaded file from support area and flashed it with safe flash and full flash too but it is still dead position.
see below log

Code:

Flash files count is :19
 Action : Firmware update.
 Selected Model: Jazz: Jazz Digit 4G
 Exe version: NCKBox AndroidMTK 2.9.1
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM8)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6739 2 cb00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Loading emmi from download
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100464A3235 : 000000000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000      [3.649 GB]  Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM74)
 Starting flash helio.
  [0] WRITE TO PARTITION [ preloader ]
  [3] WRITE TO PARTITION [ recovery ]
  [15] WRITE TO PARTITION [ md1img ]
  [16] WRITE TO PARTITION [ md1dsp ]
  [17] WRITE TO PARTITION [ spmfw ]
  [18] WRITE TO PARTITION [ mcupmfw ]
  [22] WRITE TO PARTITION [ lk ]
  [23] WRITE TO PARTITION [ lk2 ]
  [24] WRITE TO PARTITION [ loader_ext1 ]
  [25] WRITE TO PARTITION [ loader_ext2 ]
  [26] WRITE TO PARTITION [ boot ]
  [27] WRITE TO PARTITION [ logo ]
  [28] WRITE TO PARTITION [ tee1 ]
  [29] WRITE TO PARTITION [ tee2 ]
  [30] WRITE TO PARTITION [ system ]
  [31] WRITE TO PARTITION [ cache ]
  [33] WRITE TO PARTITION [ userdata ]
 [helio]Wait untill phone will start charging.
 [0]All done.


Code:

Flash files count is :19
 Action : Firmware update.
 Selected Model: Jazz: Jazz Digit 4G
 Exe version: NCKBox AndroidMTK 2.9.1
 Scenario: [1]Full Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM8)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6739 2 cb00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Loading emmi from download
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100464A3235 : 000000000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000      [3.649 GB]  Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM74)
 Backup preloader saved in firmware directory.
 [HELIO][0x5688000        -  0x2000000      ]Format partition, please wait...
 [HELIO][0xbb000000        -  0x2cffbe00      ]Format partition, please wait...
 Starting flash.
 Send preloader...
 Send preloader...
 [helio]Wait untill phone will start charging.
 [0]All done.


any solution?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top