n950u unlock done but phone still lock..please help me Z3x Team

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can’t unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press ‘Unlock’ button.
5. Paste MSL code in new opened window and press ‘OK’.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’-‘Software information’
to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press ‘Unlock TMB via server’ button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’-‘Software information’
to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press ‘Unlock…’ button, select ‘Unlock SPR via Server’,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press ‘Read Codes via server’ button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM1 Communications Port
Software version: 41.1

Checking Login and Password… OK
Ballance: 22 crd.
You have 22 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device… OK
Reading phone info…
Model: SM-N950U
Android version: 9
PDA version: N950USQS8DTG3
CSC version: N950UOYN8DTG3
Phone version: N950USQS8DTG3
Product code: SM2N950UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28K729N7DZ
IMEI: 358505086261522
HW version: REV1.0
RF cal date: 2018.07.26
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-08-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
This phone may be locked to TMB and may not unlock via codes Continue? Yes
Searching Samsung diag port… detected COM107
Reading phone info… OK
Searching Samsung modem… detected COM106
Checking SIM status… OK
Executing… OK
Searching Ramdump interface… COM96 detected
Reading data from phone… OK
Calculating… OK
Searching server… OK
Waiting for server answer… OK
Freeze code: 63839741
NET lock: 72637062
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.41.1

Scroll to Top