Nokia 2.2 1191 Pattern no longer responding and FRP

Set was not responding to known pattern and could not get to recovery mode so selected set from list,read info using flash mode by connecting cable while pressing volume down then reset frp first,here log

Exe version: NCKBox AndroidMTK 2.9.4
Selected model: Nokia Nokia 2.2(TA-1191)
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now…
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(23) : MediaTek USB Port (COM23)
[23] \?usb#vid_0e8d&pid_0003#6&3b3f6816&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected…Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: FALSE
Sending loader…..
BBCHIP MT6761
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 88010344394431 : 000000000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Phone have OTP partition.
Modem version: MOLY.LR12A.R3.MP.V82.3.P14
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait…
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

Then use format data tab(all other fail) and wait at logo screen for 5 minutes,set won’t charge,here log

Action : Format UserData.
Selected Nokia:Nokia 2.2(TA-1191)
Exe version: NCKBox AndroidMTK 2.9.4
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now…
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(23) : MediaTek USB Port (COM23)
[23] \?usb#vid_0e8d&pid_0003#6&3b3f6816&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected…Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: FALSE
Sending loader…..
BBCHIP MT6761
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 88010344394431 : 000000000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(9) : MediaTek DA USB VCOM (Android) (COM9)
[9] \?usb#vid_0e8d&pid_2001#6&3b3f6816&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Detecting format adress….wait!
Starting generic userdata format…!
Partition: userdata begin: 0x20d000000 length: 0x18c4fbe00
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
[helio]Wait untill phone will start charging.
[0]All done.

Thanks team:)

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top